轿车零部件喷漆线的运用与维护，轿车零部件喷漆线用静电喷涂工作，能够削减油漆的糟蹋及过涂景象，所以能够削减清洁及废漆办理本钱。与传统工作比较，圆盘DISK自动静电涂装技术生产过程节约30－60％油漆。轿车零部件喷漆线品质提升：因为静电排斥效果使油漆粒子进行了良好的雾化及超微粒化，所以进行高档油漆工作时简单到达高标准的表面质量，制品品质安稳的疑问也就有章可依。
The use and maintenance of car parts spray painting line, car parts spray painting line with electrostatic spraying work, can reduce the paint waste and over painted scene, so can reduce the cost of cleaning and waste paint processing. Compared with the traditional work, disk DISK automatic electrostatic coating technology of the production process to save 3060% paint. The car parts painting line quality improvement: because the electrostatic repulsion effect of the paint particles had good atomization and ultra fine particles, so the high-grade paint work simple surface to the high standards of quality, product quality is stable question center.
关于轿车零部件喷漆线大批量自动运送的工件，在进烘道前一样要仔细检查是不是漏喷、喷薄或有些擦粉表象，如发现不合格件，应把好关防止进入烘道，尽可能取下重喷。如单个工件因薄喷不合格，在固化出烘道后能够重喷再次固化。
The workpiece on the car parts in large quantities of automatic painting line transport, into the oven before the check is not leaking, or some powder spray gushing phenomenon, such as found unqualifiedparts, should begoodprevent prevent into the oven, as far as possible toremoveheavy spray. Such as a single piece of work because of the thin spray is not qualified, after curing the drying path can be re spray curing.
轿车零部件喷漆线的风机的叶轮清洁；每月设备守时维护日，设备办理员用扳手把紧固螺钉松开，喷涂工作员用刮刀根除叶轮上的工业油漆，叶轮上打上黄油；设备再装置好叶轮，并锁紧紧固螺钉。一般每隔一月一次。
Clean the impeller fan car parts painting line; equipment maintenance equipment monthly punctual, the administrator with the spanner loosen fastening screws, spray the staff with a scraper to eradicate the impeller impeller made of industrial paint, butter; equipment installed impeller, and lock the fixing screw. Usually once a month.
轿车零部件喷漆线挡风板的清洁：每周六设备维护时，设备的运用者取下挡风板，用刮刀刮去板上的油漆，用水冲刷洁净，晾干后打上黄油。
Clean the windshield of the car parts spray line: when the equipment is maintained every Saturday, the equipment operator takes off the windshield, scrape the paint on the board with a scraper, wash it with water, and dry it.
轿车零部件喷漆线喷嘴的清洁；每周六设备维护时，设备的运用者取下喷嘴，和设备办理员拆下水管，需要整理管内的油漆，用水清洁净管内的剩余，设备清洁完毕后，设备好水管，喷嘴。喷嘴的开口在一个面。
The car parts spray nozzle cleaning line; every Saturday of equipment maintenance, equipment use and remove the nozzle device administrator remove water, need to clean paint tube, clean water pipe net surplus equipment after cleaning equipment, water pipe, nozzle. Nozzle opening in one face.
轿车零部件喷漆线抽水机的清洁与维护：每月设备维护日，喷涂放完喷油柜里的水，设备办理员松下紧固螺钉，取下水泵；清洁洁净叶轮上的油漆剩余及水道壁的油漆残余后，设备好紧固螺钉。
The car parts painting line pumping machine cleaning and maintenance: monthly maintenance, spraying after water injection counters, equipment administrator Panasonic fastening screws from the water pump impeller; clean the paint on the walls of the canal and the remaining residual paint, equipment fastening screws.
轿车零部件喷漆线水濂柜内壁清洁：设备的运用者把水管接在供水管上，打开水开关用水从上到下冲淋。
The car parts painting line water cabinet wall cleaning equipment using the hose in the water pipe, open water switch water from top to down with.

了解更多详情，请搜索：烤漆房,喷塑烤房,环保除尘设备 济南华誉涂装设备有限公司 http://www.huayutuzhuang.com/ 欢迎您的光临！