聚合物水泥防水涂料（简称J防水涂料）是建设部引荐的新式绿色防水涂料，由有机液料和无机粉料复合而成的双组份防水涂料，聚合物水泥防水涂料是一种既具有有机资料弹性高，又有无机资料耐久性好等长处的新式防水资料。涂覆后可构成高弹高强的防水涂膜，并可根据需要制造彩色涂层。
Polymer cement waterproof coating (J waterproof coating) is the Ministry of construction recommended new green waterproof coatings, two-component waterproof coating by organic liquid and inorganic powder compound and into the polymer cement waterproof coating is a kind of organic material has high elasticity, waterproof materials and inorganic materials with good durability the strengths of the. After coating, it can form a high elastic and high strength waterproof coating, and can be used to manufacture color coating.
聚合物水泥防水涂料施工请求
Construction requirements of polymer cement waterproof coatings
1、底层有必要洁净平整、水泥面应压光无起沙、无空鼓。
1, it is necessary to clean the bottom surface should be smooth, cement pressure light since no sand, no empty drum.
2、屋面底层含湿率应在5％以内地面及地下建筑物防水底层含湿率应在10％以内方可施工。
2, the bottom of the roof moisture content should be less than 5% in the ground and underground buildings waterproof bottom moisture content should be less than 10% of the construction.
3、屋面应设置间隔每36一个排气管。
3, the roof should be set every interval of 36 exhaust pipe.
4、甲乙料混台时，乙组份有必要先拌和均匀再与甲组份混合。
4, a mixing station, B, it is necessary to mix evenly mixed with the group A.
配比甲组份：乙组份，1：2（分量比）或1：1.5按包装请求
The ratio of component A: B, 1:2 or 1:1.5 (weight ratio) according to the packing request
施工时将甲乙料倒八桶内，用木棒或手提电动拌和器3-5分钟至均匀。用塑料刮板或橡胶刮板涂于底层上混合料要在30分钟内用完。
When the construction of the first and second material into eight barrels, with a wooden stick or portable electric mixer 3-5 minutes to uniform. Use plastic scraper or rubber scraper to coat the bottom of the mixture to be used within 30 minutes.

了解更多详情，请搜索：烤漆房,喷塑烤房,环保除尘设备 济南华誉涂装设备有限公司 http://www.huayutuzhuang.com/ 欢迎您的光临！