（1）横向喷涂法
(1) transverse spraying
喷涂图样呈直状，右手掌握喷枪，从操作者左上侧初步，挪轿车涂装中喷枪喷涂常用的几种办法动搬运扳手，从左向右进行。当行至一个接面的距离时（距离由小我掌握，通常为800～1000mm为宜），灵敏向下向左往复进行。接面通常为1／2、1／3、1／4，可根据涂料种类自行掌握。当喷完一个面积时再次第喷另一个面。根据习气，也能够从相反标的意图进行，即从操作者右下侧向上喷涂。
Spray pattern is straight, the right hand grasp the left side of the operator from the gun, and preliminary, car paint spraying in several common methods of handling pneumatic wrench, from left to right. When the line to a junction distance (distance from the ego master, usually 800 ~ 1000mm is appropriate), sensitive down left back and forth. The surface is usually 1 / 2, 1 / 3, 1 / 4, according to the type of paint. When spraying an area, spray the other side again. According to the habit, can also be carried out from the opposite intention, that is, from the operator to the lower right side of the spray.
（2）纵向喷涂法
(2) longitudinal spraying method
其方法和横向喷涂法相似，仅仅喷枪嘴图样忙改为程度标的意图，喷枪从左上方或右上方往下往复运转。也能够从右下方或左下方往上往复运转。
The method is similar to that of the horizontal spray method, and only the spray nozzle pattern is changed to the degree of intent, and the spray gun runs back and forth from the upper left or the upper right. It can also run up and down from the lower right or lower left.
（3）纵横穿插法
(3) cross section method
喷涂时第一遍纵神往返喷涂，第二遍时横神往返喷涂，每遍都要改变图样的标的意图。
Spraying the first time again and again God spray, second times when God cross spray, each time to change the pattern of the intent of the subject.
（4）横向两层法和纵向两层法
(4) the horizontal two layer method and the longitudinal two layer method
喷涂标的意图不变，第一遍喷完后，再按正本的方法喷涂。以上各类操作方法应根据涂料的种类随机选用。
The purpose of spraying the same, after the first spray, and then according to the original method of spraying. All kinds of operation methods should be selected according to the type of coating.

了解更多详情，请搜索：烤漆房,喷塑烤房,环保除尘设备 济南华誉涂装设备有限公司 http://www.huayutuzhuang.com/ 欢迎您的光临！