正确的涂料施工办法才能让涂料表现专业功能，就木器漆而言，想要得到好的作用就一定要注意施工办法，在这里给我们介绍木器漆施工的六大窍门。
The correct way to paint paint to make the performance of professional functions, wood paint, in order to get a good effect, we must pay attention to the construction method, here to introduce us to the construction of wood lacquer six tips.
木器漆施工窍门一：先期除尘。首要要把木材外表打磨平整，处理浮灰，清洗时可用专用除尘布，大面积（如地版）用吸尘器重复吸尘。
Wood lacquer construction tips: first dust removal. The first to timber processing polishing, cleaning dirt, used when special cleaning cloth, a large area (such as vacuum cleaner repeat edition).
木器漆施工窍门二：因材而异。了解木材的木质，如果是硬木材（如柚木、榉木、孟加拉斯）应慎用腻子、泡力水等打底防止形成变色和影响附着力。硬质木材，想要得
Two tips: the wood lacquer construction materials. Understanding of wood wood, if it is hard wood (such as teak, beech, Bangladesh) should be used with caution putty, foam water and so on to prevent the formation of discoloration and affect adhesion. Hard wood, want to get
到最佳作用，就直接刷油漆，如需填缝隙，主张用油漆加细木粉拌和均匀添补；若是通常木材，如需要用通明腻子做底材处理，则先要用刮刀均匀涂刮全部底层，宜薄不宜厚，干燥后打磨要均匀并要完全打磨掉附在木材外表的剩余的通明腻子，防止形成漆病。
To the best effect, direct brush paint, such as the need to fill the gap, advocate the use of paint and fine wood powder mixing evenly fill; if usually wood, such as the need for transparent putty do surface treatment, the first to use uniform scraper scraping the bottom of all, are advised to thin thick, dry grinding should be uniform and to be completely polished off attached to the timber of the remaining transparent putty, paint to prevent the formation of disease.
木器漆施工窍门三：预备。涂刷油漆时环境和涂刷工具有必要清洗，操作人员应穿清洗的作业服，戴清洗的作业帽。
Wood lacquer construction tips three: preparation. Paint environment and brushing tools necessary to clean, operating personnel should wear clean work clothes, wear clean work cap.
木器漆施工窍门四：涂层掌握。涂刷油漆宜薄不宜厚，可薄层多道进行；做多层涂装施工时，每遍涂刷应待下层干透后施工，而且每遍要打磨。
Wood lacquer construction tips four: coating mastery. Brushing paint should be thin not thick, but can be carried out in multi layer; multi layer coating construction, each brush should be used after the construction of the dry layer, and every time to burnish.
木器漆施工窍门五：适温施工。气温降至5℃以下时，会延伸枯燥时刻，一起气温过低会发生白雾或消光景象，因而应防止在此情况下施工；防止在太阳直射或高温下操
Wood lacquer construction tips five: suitable temperature construction. The temperature dropped to 5 degrees Celsius, will extend a dull moment, together with the low temperature will occur fog or extinction phenomenon, which should be prevented in this case construction; prevent direct sunlight or high temperature.
作，气温过高涂料枯燥较快，也会发生气泡，因而应也应尽量防止高温施工。
As a result, the temperature is too high paint dry faster, there will be bubbles, and therefore should also try to prevent high temperature construction.

了解更多详情，请搜索：烤漆房,喷塑烤房,环保除尘设备 济南华誉涂装设备有限公司 http://www.huayutuzhuang.com/ 欢迎您的光临！